+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Your Daily Blog (/forumdisplay.php?fid=77)
+--- Thread: Teaching 74bassman how to do an inframe (/showthread.php?tid=4606)
RE: Teaching 74bassman how to do an inframe - 74bassman - 09-07-2019
Update the inframe now has 20k miles. No issues going on, other than fuel economy not where I want yet. ( As of filling this am 7.32) I'm still using original crank, intake cam, and all 6 injectors. I'am doing the 3rd oil change now, after this I will go back to 12k miles for service. I also have to change the suspension leveling valve today.
The inframe could have been done a lot faster if I had gone to Mister Hag, but I wouldn't have gotten the experience and education. If you have the time and the ability to be down for an extended period of time, I would say this was well worth doing it yourself. The confidence I gain was well worth the time I lost from not running. I feel more confident in my ability to work on my truck, and not just take it to shop.
Thank You Rawze, and Mr Hag.
RE: Teaching 74bassman how to do an inframe - Rawze - 09-08-2019
It took mine about 80,000 miles for the fuel mileage to finally return to its former glory after I did mine.
As well, Thanks for the update.