+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Another oil pump shin question (/showthread.php?tid=613)
Another oil pump shin question - overshot - 07-11-2016
My cm2250 has 519047 miles/10693 hrs on it.
Would it be advisable to shim the oil pump?
Current oil psi at operating temp is 35.
40 when cold at idle.
RE: Another oil pump shin question - Wiseman - 07-11-2016
35 psi at operating temperature at idle is very good pressure.
RE: Another oil pump shin question - overshot - 07-11-2016
(07-11-2016 )Wiseman Wrote: 35 psi at operating temperature at idle is very good pressure.Sorry, the 35 psi is while I'm going down the road.
RE: Another oil pump shin question - Wiseman - 07-11-2016
Then you need to bump it up . Read Hammerhead's post and few other's related .