+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: International Trucks Related Help (/forumdisplay.php?fid=69)
+--- Thread: International 9200 Issue (/showthread.php?tid=7309)
International 9200 Issue - rtjohnson1982 - 04-30-2021
[attachment=7736][attachment=7736]My 2007 International 9200 just did this and never seen anything like this before. Truck appears to be running fine, tried shutting it off and cycling the key and cranked up but didn’t help. Added pic below. Thanks for any help.
RE: International 9200 Issue - tree98 - 04-30-2021
What???? The speedometer needle??
RE: International 9200 Issue - rtjohnson1982 - 04-30-2021
Yes it quit working and threw a check engine lighting
RE: International 9200 Issue - Chamberpains - 04-30-2021
Check your speedo sensor on the output shaft on the transmission. It's probably the wires, plug in to the sensor or the sensor itself are bad or broken or pinched.
RE: International 9200 Issue - Lonestar10 - 04-30-2021
Try slowing down... Lol
RE: International 9200 Issue - Rawze - 04-30-2021
Also, why is your voltage gauge above 14Volts. That seems a bit high if you ask me.