Rawze.com: Rawze's ISX Technical Discussion and more
Brass Fitting ID - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Brass Fitting ID (/showthread.php?tid=7576)



Brass Fitting ID - RocketScott - 07-22-2021

Anybody recognize the markings on this fitting?

This isn't the actual fitting that I need but the roll mark was easier to get a picture of

It's not Parker. I was in their store yesterday and they had no idea




RE: Brass Fitting ID - snailexpress - 07-22-2021

Looks very close
https://trademark.trademarkia.com/logo-87152246.html


RE: Brass Fitting ID - RocketScott - 07-23-2021

That looks like a newer/ish company

This came off an '89 Peterbilt

Possible that the company isn't around anymore, or was sold to someone else


RE: Brass Fitting ID - smorgan87 - 07-23-2021

What kinda fitting is it? Flare? Compression? Pipe? Shouldnt be oring on a 89.


RE: Brass Fitting ID - RocketScott - 07-23-2021

The fitting I'm looking for is a test probe port that goes on top of the thermostat housing

1/8' NPT threads with a 1/8" NPT plug in the top to close it off. There's a grommet inside that seals the probe when it's inserted

I can find all sorts of test ports in 1/4" NPT but nothing in 1/8"



For now I just replaced it with a 1/8" male to female fitting with a 1/8 pipe plug in the top to seal it off