Rawze.com: Rawze's ISX Technical Discussion and more
ac high pressure sensor - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: ac high pressure sensor (/showthread.php?tid=856)



ac high pressure sensor - ktbtrucking - 09-09-2016

hello,

have fan set on high speed all the time
under insite it shows air conditioning pressure switch ON
All the time, does not matter if air condition is on or off
checked solenoid(good), jumped high pressure switch no effect insite says on
disconnected low pressure and compressor does not start
cant drain the system but bought high pressure and also connected
it is always On under insite, also I have the 11v on the switch harness that goes from switch to ecm
any thoughts?
it is volvo vnl 2002 with cummins isx


RE: ac high pressure sensor - Mr Hagg - 09-09-2016

This is for the pressure switch on the firewall.It is a 3 wire switch. It controls the fan for the engine


RE: ac high pressure sensor - ktbtrucking - 09-09-2016

have a truck 2004 and it has a 3 wire ac switch on firewall and i believe it measures both high and low
2002 truck has two switches one for low and one for high
high is next to radiator and low under the air filter
this is what i have figured out so far

on my 2004 truck when I turn ac on/off inside the cab insite also changes on/off the name "air conditioner pressure switch"
on my 2002 truck insite all time shows "air conditioner pressure switch" ON so that keeps fan on high speed,
also supplied "air" to radiator than it slows down

looks like ecm related issue for me

i assume tri wire switch on the firewall refers to ac switch or there is another one???