+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Air Cooled Transmission Cooler (/showthread.php?tid=9239)
Air Cooled Transmission Cooler - kozakvod - 11-28-2023
I'm looking for suggestions on type and where to mount for an Air Cooled Tranny Cooler.
My truck is a 2014 Pete 388 with 13 speed Eaton. I going to have to drain my coolant to fix a leak on that blasted manifold under the cab and I'm DONE with dang coolant leaks under there because as a car hauler with low ground clearance I can't physically get under it without blocking it up and if a leak happens on the road I'm in a real tough spot. The engine is deleted (@m*m^2 if anyone is curious) so I can eliminate the final piece of the coolant under the cab by changing out that tranny cooler, which I need to do anyway for the fear it's going to dump coolant into my tranny. So by going to an air cooled cooler I can completely eliminate ALL potential under cab coolant leaks.
If anyone has suggestion on what type of cooler to get and where to potentially mount it I would be greatly appreciative.
RE: Air Cooled Transmission Cooler - Rawze - 11-29-2023
this may help:
http://rawze.com/forums/showthread.php?tid=3217&pid=28933#pid28933
and...
http://rawze.com/forums/showthread.php?tid=4117&pid=35206#pid35206
RE: Air Cooled Transmission Cooler - kjjohnson1980 - 11-29-2023
I had a similar issue with coolant leaks on my rig, and I switched to an air-cooled tranny cooler as well. I mounted mine behind the grille to get better airflow, and it's been working like a charm. Just make sure it's securely mounted and has good exposure to fresh air.
RE: Air Cooled Transmission Cooler - kozakvod - 11-29-2023
This is a MUCH better option price wise through eBay, thank you for that for sure. It states that the Hayden cooler is 18"h x 38"L. That is a pretty darn large size, now I'm wondering where in the heck am I going to mount that thing?
What would those hose sizes be, and is the size consistent from cooler to transmission ports?
RE: Air Cooled Transmission Cooler - kozakvod - 12-07-2023
With this project finished the trans is no longer subjected to coolant contamination. Thank you to everyone who offered their help here and offline.
RE: Air Cooled Transmission Cooler - Rawze - 12-07-2023
You need heat shielding on those lines where they cross under that turbo along the frame rail. Believe me when I say that the bleed-off heat from the turbo/exhaust is going to make those lines last a very short time before they get cooked. I learned this the hard way on my own truck because the bypass oil filter oil lines were run along the same place.
example of heat shroud for hoses: https://amzn.to/3Tgeazk
RE: Air Cooled Transmission Cooler - tree98 - 12-07-2023
Looks good Kozakvod