Turbocharger WGT problem

[Vlad]

Hi guys! 2 months old turbocharger gear is stuck. Probably cause high rpm or black smoke witch was collected before (injectors replacement)
Does anybody knows how to clean it or solve this problem.
      

[Waterloo]

Looks like you need a new actuator... That baby ain't two months old. They do fail.

[Vlad]

It's traveling but only to the way as on a pic

[Waterloo]

I would say the actuator is toast. Usually when you install a new turbo it is best to replace the actuator with it.

[Vlad]

No, gear on actuator is rolling

[Waterloo]

And, when the new turbo was installed, was Insite used to properly calibrate everything? The actuator to the new turbo, or was the actuator just slapped back on? There is a procedure for this, you will find it in the Video link at the top of the page.

[Vlad]

Actuator is ok and new olso

[Waterloo]

Answer the question.... When the actuator and turbo were married, was Insite used to calibrate? Also, are we looking at a reman or new turbo? A reman turbo part number will start with RX. And, is the mandate still on this motor, if the mandate was removed, who did it?

[Vlad]

calibration did properly. And I olso can do it by myself on a road. How I can clean it or make it move to all Way ?