Isx 2350 485hp. Surges has no power |
02-11-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #1 | |||
| |||
Isx 2350 485hp. Surges has no power Hey guys I need help So it started acting as if the fuel filter was plugged surging when accelerating and cutting off badly. The turbo kicks in and out on idle. There is one code that shows but is no help at all. (6263 no lamp description unknown) | |||
02-11-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #2 | |||
| |||
RE: Isx 2350 485hp. Surges has no power More info is needed. Make, model and year of the truck. What have you done so far? Is it demandated (dleted)? | |||
02-11-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #3 | |||
| |||
RE: Isx 2350 485hp. Surges has no power Is 2014 W900 485hp 700,000 miles I haven’t change any sensor because there is no codes. I did remove exahust pressure sensor to make sure they weren’t plugged I cleaned the IMAP, replaced the fuel filters and checked the wiring | |||
02-11-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #4 | |||
| |||
RE: Isx 2350 485hp. Surges has no power Open circuit or high voltage detected at the fan control circuit. is what that codes come backs to on quick serve | |||
|
02-11-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #5 | |||
| |||
RE: Isx 2350 485hp. Surges has no power Now that one makes sense! A month ago I cut the + wire going to the fan solenoide because the fan would not go off. I fed it with a switch so I could control it. Like I said I cleaned the sensors and EGR valve I just test drove it and it runs fine but I’m not happy as I really don’t know what was wrong. I also had force a regen and it was.7 the result the one previous was .6 so I think the DPF is working fine. I think I need to jailbrake the truck, I used MMM 2.0 for my old cm871 and it worked beautiful | |||
02-12-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #6 | |||
| |||
RE: Isx 2350 485hp. Surges has no power why not just fix the A/C high pressure switch circuit (or whatever else is commanding the fan to be on all the time) instead of butchering up the wiring harness?. Just trying to wrap my head around why someone would cover up a problem instead of properly fix it? User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
02-12-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #7 | |||
| |||
RE: Isx 2350 485hp. Surges has no power | |||
02-12-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #8 | |||
| |||
RE: Isx 2350 485hp. Surges has no power Any input is appreciated thank | |||
02-12-2020, (Subject: Isx 2350 485hp. Surges has no power ) Post: #9 | |||
| |||
RE: Isx 2350 485hp. Surges has no power Input on what? Fix the wiring, odds are the high pressure switch is bad, replace it too. MM files for the 871 will not work on your truck. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.