Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Xpi Injector

new reply
Xpi Injector
01-06-2017, (Subject: Xpi Injector ) 
Post: #9
benjiisx Offline
Established  (0 Likes)  **

 		Posts: 7
Joined: Jan 2017
Thanks: 1
Given 0 thank(s) in 0 post(s)
RE: Xpi Injector
Engine build date shows 4/10 and truck build date is 5/10. Those numbers are from the data plates on both the engine and truck.

Thanks for the help guys. I'm heading to quikserv now.

Edit: After registering, it does show up as a cm2250. I was thrown off because it has the same type of injector. Sorry about that. I must admit that Cummins are newish to me, I've been stuck in Mack ACET hell for 10 years, ugh, French motors.
Return to Top | find
replyreply
new reply


Messages In This Thread
Xpi Injector - benjiisx - 01-05-2017,
RE: Xpi Injector - Rawze - 01-05-2017,
RE: Xpi Injector - Brock - 01-05-2017,
RE: Xpi Injector - Hammerhead - 01-06-2017,
RE: Xpi Injector - Rawze - 01-06-2017,
RE: Xpi Injector - benjiisx - 01-05-2017,
RE: Xpi Injector - Mr Hagg - 01-06-2017,
RE: Xpi Injector - benjiisx - 01-06-2017
RE: Xpi Injector - Rawze - 01-06-2017,
RE: Xpi Injector - Mr Hagg - 01-06-2017,
RE: Xpi Injector - benjiisx - 01-06-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication