| Coolant Leak from EGR Cooler Fitting with Motor Block |
| 01-25-2017, (Subject: Coolant Leak from EGR Cooler Fitting with Motor Block ) Post: #4 | |||
| |||
| RE: Coolant Leak from EGR Cooler Fitting with Motor Block The o rings keep leaking because that expansion piece in between the cooler and the elbow is on a horrendous angle. It should be near straight. For some reason the EGR cooler is sticking out too far from the block. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Coolant Leak from EGR Cooler Fitting with Motor Block - tariqzai - 01-24-2017, RE: Coolant Leak from EGR Cooler Fitting with Motor Block - Nilao - 01-24-2017, RE: Coolant Leak from EGR Cooler Fitting with Motor Block - Rawze - 01-24-2017, RE: Coolant Leak from EGR Cooler Fitting with Motor Block - Signature620 - 01-25-2017 RE: Coolant Leak from EGR Cooler Fitting with Motor Block - Rawze - 01-25-2017, RE: Coolant Leak from EGR Cooler Fitting with Motor Block - in2trux - 01-25-2017, RE: Coolant Leak from EGR Cooler Fitting with Motor Block - tariqzai - 01-25-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.