Coolant Leak from EGR Cooler Fitting with Motor Block

[Rawze]

(01-25-2017 )Signature620 Wrote:  The o rings keep leaking because that expansion piece in between the cooler and the elbow is on a horrendous angle. It should be near straight. For some reason the EGR cooler is sticking out too far from the block.

Nice catch...

Didn't notice that in the pic until you pointed it out.

I have seen that before too. EGR cooler not mounted improperly. It usually also causes them to crack and fail after a while too.

Also, I hope it is not an after-market EGR cooler, but OEM. Otherwise he will eventually be looking at a failed engine too.

Related reading..
http://rawze.com/forums/showthread.php?t...33#pid2233

===

failed engine from after-market egr cooler..
http://rawze.com/forums/showthread.php?t...02#pid2802
==