Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / ISX cm871 inframe

new reply
ISX cm871 inframe
02-09-2017, (Subject: ISX cm871 inframe ) 
Post: #8
Waterloo Offline
HMR-Contrinbuting V.I.P.  (4127 Likes)  *****

 		Posts: 4,617
Joined: Oct 2014
Thanks: 5334
Given 4127 thank(s) in 2094 post(s)
RE: ISX cm871 inframe
Book is 45 hours plus parts. Much will depend on what is found when you crack her open. And then there are parts like oil coolers, etc. They are not bad now, but will eventually fail. How far do you want to go? My in frame was $39,000, and all but two or three items were replaced. That included going through the 18spd, new clutch, trans oil cooler, new lines, pages of parts. Sky's the limit. Interview your shop and mechanic.
Return to Top | find
replyreply
new reply


Messages In This Thread
ISX cm871 inframe - flonly - 02-05-2017,
RE: ISX cm871 inframe - flonly - 02-05-2017,
RE: ISX cm871 inframe - Brock - 02-09-2017,
RE: ISX cm871 inframe - Waterloo - 02-09-2017
RE: ISX cm871 inframe - Hedley - 02-09-2017,
RE: ISX cm871 inframe - Unilevers - 02-09-2017,
RE: ISX cm871 inframe - Unilevers - 02-09-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication