| Lot of blowby after rebuild |
| 09-01-2017, (Subject: Lot of blowby after rebuild ) Post: #9 | |||
| |||
| RE: Lot of blowby after rebuild May have the same problem I had. Polished liners from carbon packed pistons,caused by incorrect injector cam timing retarded 12 thou. My engine had blowby but didn't bun oil, not a measurable quantity anyway. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - tlzimmerman - 08-31-2017, RE: Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - Nilao - 08-31-2017, RE: Lot of blowby after rebuild - hhow55 - 08-31-2017, RE: Lot of blowby after rebuild - Rawze - 08-31-2017, RE: Lot of blowby after rebuild - cubillos389 - 08-31-2017, RE: Lot of blowby after rebuild - hhow55 - 09-01-2017, RE: Lot of blowby after rebuild - cubillos389 - 09-01-2017, RE: Lot of blowby after rebuild - Rawze - 09-01-2017, RE: Lot of blowby after rebuild - cubillos389 - 09-03-2017, RE: Lot of blowby after rebuild - Aussie Steve - 09-01-2017 RE: Lot of blowby after rebuild - preacherboy24 - 09-01-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.