Lot of blowby after rebuild
09-01-2017, (Subject: Lot of blowby after rebuild ) 
Post: #11
RE: Lot of blowby after rebuild
(09-01-2017 )cubillos389 Wrote:  
(09-01-2017 )hhow55 Wrote:  Another victim of a bad delete, who remain's to be stuck on stupid

Ok, but what would be causing that within the programming and how should I go about fixing it?

I don't judge something as "bad" unless i see it, or if you have the typical symptoms. You claim you do not,.. soo .... If in doubt, pull a copy of the tune from the truck via c&term, e-mail it to me and I will look at it.

You should never question your programming. Either it is good, or bad,.. and a second opinion is worth its weight in gold because there ARE so many "bad" out there.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Brock , hhow55 , Waterloo , preacherboy24 , cubillos389


Messages In This Thread
RE: Lot of blowby after rebuild - Rawze - 09-01-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.