Hmmm...air leak.
10-15-2017, (Subject: Hmmm...air leak. ) 
Post: #6
RE: Hmmm...air leak.
Possible. I don't think I'm at that point (got that tube feeding the compressor in my intake that blocks off the soot) and that's no longer a concern. I'll be putting my boroscope in the tanks anyway when I swap them out just to be sure.

I did have a failed dryer on it when I got the truck though...the supply tank was full of all sorts of crud that got flushed out. Mostly slurry...


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply
 Thanks given by: Rawze


Messages In This Thread
Hmmm...air leak. - dhirocz - 09-23-2017,
RE: Hmmm...air leak. - dhirocz - 09-23-2017,
RE: Hmmm...air leak. - dhirocz - 10-14-2017,
RE: Hmmm...air leak. - Shandro - 10-14-2017,
RE: Hmmm...air leak. - Rawze - 10-15-2017,
RE: Hmmm...air leak. - dhirocz - 10-15-2017
RE: Hmmm...air leak. - dhirocz - 10-24-2017,
RE: Hmmm...air leak. - hhow55 - 10-25-2017,
RE: Hmmm...air leak. - hhow55 - 10-25-2017,
RE: Hmmm...air leak. - dhirocz - 10-25-2017,
RE: Hmmm...air leak. - hhow55 - 10-25-2017,
RE: Hmmm...air leak. - dhirocz - 11-08-2017,
RE: Hmmm...air leak. - Nilao - 11-10-2017,
RE: Hmmm...air leak. - dhirocz - 11-10-2017,
RE: Hmmm...air leak. - Nilao - 11-10-2017,
RE: Hmmm...air leak. - dhirocz - 11-11-2017,
RE: Hmmm...air leak. - dhirocz - 11-11-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.