Cm2250 injector test fail... |
01-26-2018, (Subject: Cm2250 injector test fail... ) Post: #11 | |||
| |||
RE: Cm2250 injector test fail... Speaking of this jimeneztrans84, I had the same problem about Xmas time. Fuel pressure fluctuated about 3k psi when running over commanded. I swapped out the actuator too and it seemed to help, but the problem came back. So I swapped the fuel relief valve and the pressure sensor and changed filters for good measure. Now it stays close to commanded but still fluctuates a little. Cummins says fluctuation up to 1450 psi is acceptable. User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!! | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm2250 injector test fail... - jimeneztrans84 - 01-24-2018, RE: Cm2250 injector test fail... - Starlight - 01-24-2018, RE: Cm2250 injector test fail... - jimeneztrans84 - 01-26-2018, RE: Cm2250 injector test fail... - snailexpress - 01-26-2018, RE: Cm2250 injector test fail... - jimeneztrans84 - 01-26-2018, RE: Cm2250 injector test fail... - snailexpress - 01-26-2018, RE: Cm2250 injector test fail... - jimeneztrans84 - 01-24-2018, RE: Cm2250 injector test fail... - Rawze - 01-25-2018, RE: Cm2250 injector test fail... - Starlight - 01-26-2018, RE: Cm2250 injector test fail... - jimeneztrans84 - 01-26-2018, RE: Cm2250 injector test fail... - JMBT - 01-26-2018 RE: Cm2250 injector test fail... - jimeneztrans84 - 01-26-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.