| Burning oil after new head install |
| 01-30-2018, (Subject: Burning oil after new head install ) Post: #3 | |||
| |||
| RE: Burning oil after new head install Does it have a lot of b lo-by too when you pull off the oil fill cap? have you checked for oil in the air system? Is it smoking badly? Did they do any bottom end work like replace rod/main bearings? User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - JMBT - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-30-2018 RE: Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, RE: Burning oil after new head install - dhirocz - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.