Burning oil after new head install |
01-30-2018, (Subject: Burning oil after new head install ) Post: #4 | |||
| |||
RE: Burning oil after new head install It has a little blow-by, nothing more than when I took it in. I saw the liners when they had it apart, still had good crosshatch in them. No oil in the air system. It has a little smoke you can see idling if you are looking at it in bright light, it kind of puffs not a even flow. No smoke when under power. If you get downwind when it's idling you can really smell the oil, doesn't smell like diesel. They pulled the pan and checked it over, but didn't do bearings. They put a new gear fuel pump on also, but I wouldn't think that would have anything to do with my oil consumption. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - JMBT - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-30-2018 RE: Burning oil after new head install - IrishKW - 01-30-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, RE: Burning oil after new head install - dhirocz - 01-30-2018, RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - IrishKW - 01-31-2018, RE: Burning oil after new head install - Rawze - 01-31-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.