Exhaust Gascket leaks |
03-25-2018, (Subject: Exhaust Gascket leaks ) Post: #12 | |||
| |||
RE: Exhaust Gascket leaks (03-25-2018 )MCRENT Wrote:(03-25-2018 )alborz Wrote: the gasket for that cylinder was bad. both my new problem is that the exhaust manifold bolt for the fifth cylinder broke inside. the lower bolt. I tried to use bolt extractor. the extractor broke inside too. and you know the extractor is hardened steel and can't drill through it. anyone has had this problem and solved successfully? it does not work with that. I tried to use Dremel to just grind it out but Dremel bits are so fragile and break fast | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Exhaust Gascket leaks - alborz - 03-20-2018, RE: Exhaust Gascket leaks - Waterloo - 03-20-2018, RE: Exhaust Gascket leaks - RTRUCKING48 - 03-22-2018, RE: Exhaust Gascket leaks - Chamberpains - 03-22-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-22-2018, RE: Exhaust Gascket leaks - Chamberpains - 03-23-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-23-2018, RE: Exhaust Gascket leaks - alborz - 03-25-2018, RE: Exhaust Gascket leaks - MCRENT - 03-25-2018, RE: Exhaust Gascket leaks - alborz - 03-25-2018 RE: Exhaust Gascket leaks - Hammerhead - 03-25-2018, RE: Exhaust Gascket leaks - Fixmytruck123 - 03-25-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-26-2018, RE: Exhaust Gascket leaks - alborz - 03-26-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.