| Exhaust Gascket leaks |
| 03-26-2018, (Subject: Exhaust Gascket leaks ) Post: #13 | |||
| |||
| RE: Exhaust Gascket leaks You need to find an actual good quality carbide burr that will fit your dremel tool, not a bit that comes with a dremel tool. I get mine from a machine shop supply place at home. They're about $40/ for the good ones... User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Exhaust Gascket leaks - alborz - 03-20-2018, RE: Exhaust Gascket leaks - Waterloo - 03-20-2018, RE: Exhaust Gascket leaks - RTRUCKING48 - 03-22-2018, RE: Exhaust Gascket leaks - Chamberpains - 03-22-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-22-2018, RE: Exhaust Gascket leaks - Chamberpains - 03-23-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-23-2018, RE: Exhaust Gascket leaks - alborz - 03-25-2018, RE: Exhaust Gascket leaks - MCRENT - 03-25-2018, RE: Exhaust Gascket leaks - alborz - 03-25-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-25-2018, RE: Exhaust Gascket leaks - Fixmytruck123 - 03-25-2018, RE: Exhaust Gascket leaks - Hammerhead - 03-26-2018 RE: Exhaust Gascket leaks - alborz - 03-26-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.