Elusive vibration |
01-17-2019, (Subject: Elusive vibration ) Post: #1 | |||
| |||
Elusive vibration I have a vibration/shake under a load at around 20 psi boost at around 1300 RPM. If I down shift and bring the RPMs up, it smoothes out. As soon as I let off, it’s gone. Sometimes accelerating up to 28-30 psi boost it’s gone/can’t be felt. Just replaced all 6 injectors due to age, and hoping this might go away. Could this be caused by dirty/worn fuel or timing actuators? Idles smoothly but shakes a bit at 11-1200 rpm. Rear motor mounts are one-year-old. Fronts are original. Crankshaft dampener is about three years old. Driveline has all been gone through. 933,000 miles. 2010 CM 871 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Elusive vibration - Mrkentee - 01-17-2019 RE: Elusive vibration - Rawze - 01-17-2019, RE: Elusive vibration - Mrkentee - 01-17-2019, RE: Elusive vibration - Rawze - 01-17-2019, RE: Elusive vibration - Mrkentee - 01-17-2019, RE: Elusive vibration - Rawze - 01-17-2019, RE: Elusive vibration - Mrkentee - 01-17-2019, RE: Elusive vibration - Waterloo - 01-17-2019, RE: Elusive vibration - Mrkentee - 01-17-2019, RE: Elusive vibration - Waterloo - 01-17-2019, RE: Elusive vibration - ynot - 01-17-2019, RE: Elusive vibration - flatbed94kid - 01-17-2019, RE: Elusive vibration - ynot - 01-18-2019, RE: Elusive vibration - Mrkentee - 01-18-2019, RE: Elusive vibration - ynot - 01-18-2019, RE: Elusive vibration - Mrkentee - 02-22-2019, RE: Elusive vibration - JMBT - 02-23-2019, RE: Elusive vibration - Mrkentee - 02-23-2019, RE: Elusive vibration - Chamberpains - 02-23-2019, RE: Elusive vibration - Mrkentee - 02-24-2019, RE: Elusive vibration - DVT873 - 02-25-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.