Intake valve failure
02-27-2019, (Subject: Intake valve failure ) 
Post: #3
RE: Intake valve failure
I'm not looking for how to diagnose it as that's done. It's an intake valve. It must be a very small crack or chip and the cylinder is firing fine and clean exhaust. The light huffing in the breather turned into a really loud pop when i pulled the egr inlet off the intake manifold. It's number 4.

I pulled an AERA report listing what they call an intake valve chordal malfunction. Just wondering how common it's been or did I hit the lottery. For AERA to do a report and list updated parts it must be more common than Cummin's would like.

At least it's not a dropped valve. Still pretty disappointing on an engine that was running really well.
replyreply


Messages In This Thread
RE: Intake valve failure - Joesixpack - 02-27-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.