New to me cm871

[Rawze]

(03-20-2019 )Scoot5869 Wrote:  ...
my question is how do I tell if I have a bad demandate
...

Unless you know 100% for sure that it was done by someone highly recommended on this forum, ASSUME IT IS BAD --- ALWAYS, no matter how much someone says a shops work is good when it comes to de-mandate programming.

99.999% of everyone doing that kind of work are horrible at it, and especially the well known big-name places that charge big $$$.

You have a couple options...

* (my recommendation) Get the software to pull the file yourself, get your own 'inline-5' or 'inline-6' adapter, and a decent laptop. Pull the file out of it using CT, e-mail it to me and I will inspect it for you with an objective opinion.

or...

* Get with Unilevers or Mommaburt on the forum here and have one of them help you get the program pulled out of it for proper inspection.

or...

* If you are in the ATL,ga area and I am not busy, I can help you look at it directly, but I am not always avail for people to just stop by any time they like without notice.