09 prostar visor lights

[barf]

I don't know how I missed this post. Sorry for the late reply. I've been running different clearance markers in my '09 ProStar for years now. Several years ago I needed to replace one and the local Int'l stealer wanted $50 CDN. I found TA truckstops carry a similar sized one for (I think) $10 US. Later I found the exact light at Princess Auto (a Canadian chain) carries the exact same light but with their brand name of Powerfist for $7 CDN (about $6 US). The screw holes line up perfectly. Only problem is the light isn't quite as oval as factory is.

One small caution is my truck leaks rain water. I don't think it's coming in from around these lights but I caulked them just in case. I've always wondered if Rawze (or anyone) could use his 3D printer to make plastic ovals, but 3D, not flat, that would accommodate a smaller light and change the angle so it's aimed straight, not pointed up.

edit: I believe this is a Grand General GGA74830