CM 871 won’t regen
05-05-2019, (Subject: CM 871 won’t regen ) 
Post: #9
RE: CM 871 won’t regen
(05-04-2019 )theironoracle Wrote:  ...
I do wash DPFs with a steam cleaner. It seems to have worked fine a half dozen times? Just need more thoughts on this.
...

I guess the concept of "rare and precious metals" never crossed your mind? -- YOUR DESTROYING YOUR DOC AND DPF!!!!!!!!!!!!!!!!!!! -- Seen plenty of guys say thay got away with it a few times, only to regret it big-time later. Each time you do that, it makes it more and more difficult for them to operate correctly.

NEXT is the fact that 50% OF ALL THE HOLES IN A DPF ARE SUPPOSED TO BE BLOCKED OFF AT ONE END!. This is so that it can properly trap soot and fuel as it regens. -- ANY KIND OF LIQUID will very quickly start to cause damage.

I know of a fleet that had 500 trucks, that had to replace more then 200 DPF's because the shop manager decided to start steam clean them too. -- They regretted it after about 3 times of this too, as trucks were failing and shutting down on them left and right at a highly accelerated rate.

Lot of garbage on the internet,.. one of them is running around claiming they wash or steam clean out their DOC, DPF, and/or SCR cans. -- I DO NOT ALLOW SUCH BAD/MISLEADING INFO ON HERE!!!! Truck owners have a hard enough time as it is to be doing garbage like that and making their problems worse!.


AND IF YOUR A MOBILE MECHANIC LIKE YOUR BIO CLAIMS -- AND YOUR DOING THIS TO YOUR CUSTOMERS TRUCKS --- I SUGGEST YOU STOP THAT PRACTICE IMMEDIATELY!!!


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: CM 871 won’t regen - Rawze - 05-05-2019
RE: CM 871 won’t regen - Unilevers - 05-05-2019,
RE: CM 871 won’t regen - Unilevers - 08-07-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.