GlowShift boost gauge response

[Rawze]

(07-06-2019 )Rilloroc Wrote:  My glowshift pyro started doing that max out recently. It will max out for a few seconds and then return to normal on it's own. Scared me at first because I've been having some other issues lately (doser sprang a leak and caught on fire) and thought that it was happening again. I'm guessing maybe the fire damaged the lead for the temp sensor on the pyro on mine. Maybe check that lead on yours possibly where it connects to the gauge.

the pyro needle will go to max if the probe looses its connection. It will also cycle to max for a moment if the gauge resets due to noise or intermittent connection detect.