Turbo problem 870

new reply

Threaded Mode | Linear Mode

Turbo problem 870

07-24-2019, (Subject: Turbo problem 870 )

Post: #3

Chamberpains Offline

Contributing V.I.P. (2773 Likes)

Posts: 2,312
Joined: Jan 2018

Thanks: 1172
Given 2773 thank(s) in 1446 post(s)

RE: Turbo problem 870

Pull the actuator off the turbo and make sure the VG ring moves freely and has full movement.

You can run the on off test using Insite. Check for any leaks and the actuator to respond. There is also a turbo test using Insite. I believe it cycles through the full commanded range and reports back if there is any problems.

Other than that, make sure you have at least 90 psi going to the control module.

Return to Top | find

reply reply

Thanks given by:

Andre_The_Giant , tree98

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Turbo problem 870 - tree98 - 07-24-2019,

RE: Turbo problem 870 - Rtrucking - 07-24-2019,

RE: Turbo problem 870 - Chamberpains - 07-24-2019

RE: Turbo problem 870 - tree98 - 07-24-2019,

RE: Turbo problem 870 - Rtrucking - 07-24-2019,

RE: Turbo problem 870 - Unilevers - 07-25-2019,

RE: Turbo problem 870 - Chamberpains - 07-25-2019,

RE: Turbo problem 870 - tree98 - 07-25-2019,

RE: Turbo problem 870 - MikeRomeoISX - 07-27-2019,

RE: Turbo problem 870 - Rawze - 07-28-2019,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.