Where do I begin!

new reply

Threaded Mode | Linear Mode

Where do I begin!

08-23-2019, (Subject: Where do I begin! )

Post: #6

Rawze

Forum Reject (13961 Likes)

Posts: 11,074
Joined: Jun 2013

Thanks: 5915
Given 13961 thank(s) in 6107 post(s)

RE: Where do I begin!

(08-23-2019 )UponARock Wrote:
(08-23-2019 )Rawze Wrote: You seriously need to pull the valve cover and inspect the overhead cams before taking it anywhere.
...

Rod/main bearings was done at a local shop in West Chicago about 200k miles ago. I'll definitely check the cams and adjust the valves if needed. When you have a moment, please PM me the shop's number you're recommending. Thanks again!

these guys...
http://rawze.com/forums/showthread.php?t...7#pid35437

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Where do I begin! - UponARock - 08-22-2019,

RE: Where do I begin! - hhow55 - 08-22-2019,

RE: Where do I begin! - Lonestar10 - 08-23-2019,

RE: Where do I begin! - Rawze - 08-23-2019,

RE: Where do I begin! - UponARock - 08-23-2019,

RE: Where do I begin! - Rawze - 08-23-2019

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.