Checking rail pressure while cranking
11-13-2019, (Subject: Checking rail pressure while cranking ) 
Post: #24
RE: Checking rail pressure while cranking
(11-13-2019 )Waterloo Wrote:  The reason I mentioned that fuel filter, it has happened to me at least twice when servicing the truck. These kids they employ just throw things together. Whenever I have had starting issues, the Davco is always the first place I go, and so far, that is where the problem has been. I carry an extra Davco with o rings in the truck just for that reason, along with my Davco Wrench. Start simple and then move up the chain...

And I know you do not have the Davco, but same principle involved with the gasket on your screw on unit, been there too, rare they mess up that filter, but it still happens, oil filters too, that is a real mess.
I had to listen to your advice sooner and I would save a lot of time, I just couldn't imagine how it is possible to install filter wrong ))) . I was not even thinking of it. How wrong I was. Is Davco filter superior to regular filter? I have Davco on dead engine, so might as well install it.
replyreply
 Thanks given by: Waterloo


Messages In This Thread
RE: Checking rail pressure while cranking - Konstantin - 11-13-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.