Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Pete & KW related Help... / Spindle wear?

new reply
Spindle wear?
01-15-2020, (Subject: Spindle wear? ) 
Post: #5
Andre_The_Giant Offline
Established  (27 Likes)  **

 		Posts: 78
Joined: Jun 2019
Thanks: 212
Given 27 thank(s) in 17 post(s)
RE: Spindle wear?
Last time the bearing was serviced my father followed the wrong procedure I believe. Yes I think it was under torqued also, should I change the bearings? Or just install them the right way/ manufacturers procedure? Should I prick the spindle to make it tighter for them? The old bearings seem slight loose on the spindle, but not sloppy. This is an axle with spacers. Here’s is a pic from under
   

User's Signature: I may be cross eyed, but i don’t cross thread
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Spindle wear? - JMBT - 01-15-2020,
RE: Spindle wear? - Rawze - 01-15-2020,
RE: Spindle wear? - Andre_The_Giant - 01-15-2020
RE: Spindle wear? - Nostalgic - 01-15-2020,
RE: Spindle wear? - Mattman - 01-15-2020,
RE: Spindle wear? - bwake - 01-15-2020,
RE: Spindle wear? - Mattman - 01-15-2020,
RE: Spindle wear? - Rawze - 01-16-2020,
RE: Spindle wear? - bwake - 01-16-2020,
RE: Spindle wear? - Mattman - 01-16-2020,
RE: Spindle wear? - Rawze - 01-18-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication