New to me low mileage ISX |
07-06-2020, (Subject: New to me low mileage ISX ) Post: #12 | |||
| |||
RE: New to me low mileage ISX I just took the entire drive shaft sets to a drivline shop and had them spin balance them. Ended up 2 of the factory shafts where far enough out they had to replace 1 and weld the other back with in .003 tolerance. They installed the carrier bearing and all new u joints. $1600. Money well spent to catch factory shenanigans or something worn out. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
New to me low mileage ISX - ahub86 - 07-05-2020, RE: New to me low mileage ISX - ahub86 - 07-05-2020, RE: New to me low mileage ISX - JimT - 07-05-2020, RE: New to me low mileage ISX - tree98 - 07-05-2020, RE: New to me low mileage ISX - ahub86 - 07-05-2020, RE: New to me low mileage ISX - ahub86 - 07-05-2020, RE: New to me low mileage ISX - JimT - 07-05-2020, RE: New to me low mileage ISX - Rawze - 07-05-2020, RE: New to me low mileage ISX - ahub86 - 07-05-2020, RE: New to me low mileage ISX - Chamberpains - 07-05-2020, RE: New to me low mileage ISX - Waterloo - 07-06-2020, RE: New to me low mileage ISX - Chamberpains - 07-06-2020 RE: New to me low mileage ISX - ahub86 - 07-14-2020, RE: New to me low mileage ISX - Rawze - 07-15-2020, RE: New to me low mileage ISX - ahub86 - 07-15-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.