Wet exhaust manifold |
07-06-2020, (Subject: Wet exhaust manifold ) Post: #12 | |||
| |||
RE: Wet exhaust manifold (07-05-2020 )Armond96 Wrote: ... Find a single mark A,B, or C ... and place a sharpie mark on the front face of the damper in front of that mark. turn the enigne until the mark on the face is pointing straight down ... you will be very close to the next mark and can easily find it... repeat until all 3 are found. a dremel with a flappy 120-grit sanding wheel turned down real low to gently dust off the rust is your friend... That or sand paper or scotch-brite pads. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - Waterloo - 07-05-2020, RE: Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - marek4792 - 07-05-2020, RE: Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - Lonestar10 - 07-05-2020, RE: Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - Waterloo - 07-05-2020, RE: Wet exhaust manifold - Armond96 - 07-05-2020, RE: Wet exhaust manifold - Waterloo - 07-05-2020, RE: Wet exhaust manifold - Rawze - 07-06-2020 RE: Wet exhaust manifold - Signature620 - 07-06-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.