Fault Code: 1145

[kozakvod]

(08-25-2020 )Rawze Wrote:  take the glass bowl off it and make sure the o-ring is between the glass bowl and the lower housing and not between the retaining nut and the glass bowl. - I had a speedco once stick the o-ring and nut down onto the clear housing from top down then screwed the nut on and it caused mine to run empty like that too.

-- you might also want to pressurize the fuel tanks to 10 psi air pressure and see if something starts to pour fuel somewhere.

With a 10 micron filter in it, there should always be fuel up on the filter.

I’ll head back over and check that.

And considering the fuel pressure drop im getting and 7 counts on fault 1145 for the #6 does it make sense do just replace that injector? Or am i just throwing darts?