Automated Eaton 10 speed shifting weird

[Satch]

I should probably update this thread for future reference. The issue has been resolved. It cost some money tho. Seemed to be a combination of...

1. The push button panel for the automatic transmission

And/or

2. Electronic clutch actuator.

I had both replaced and now the truck shifts appropriately with legal completely pressed to floor. No intermittent shifting and losing gear....

There's some technical bulletins if it takes longer than 8 seconds to engage the great, it will produce a fault. There's a way to "screenshot" that fault as it happens with since button pressed. I can't remember the exact sequence, but it's like M,+,- at same time or something like it. It can be retrieve later as a log and sent to service ranger for analysis.