| Cm870 jake issue |
| 08-22-2016, (Subject: Cm870 jake issue ) Post: #2 | |||
| |||
| RE: Cm870 jake issue If you've changed the rocker shaft, have you changed or checked the condition of the rocker arm check valves? What about the Jake rocker check valve springs? If these have been replaced or are good, what about the rocker arm bore that the check valves ride in? Is it possible that they are worn to the point they won't retain sufficient oil pressure? If all of that is good, can you check the oil supply pressure and volume? User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm870 jake issue - Rig Wrench - 08-22-2016, RE: Cm870 jake issue - Hammerhead - 08-22-2016 RE: Cm870 jake issue - Rig Wrench - 08-23-2016, RE: Cm870 jake issue - Hammerhead - 08-23-2016, RE: Cm870 jake issue - Rig Wrench - 08-23-2016, RE: Cm870 jake issue - axe - 08-23-2016, RE: Cm870 jake issue - ktmcandog - 08-28-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.