Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Installing fuel pump cm2250

new reply
Installing fuel pump cm2250
08-24-2016, (Subject: Installing fuel pump cm2250 ) 
Post: #13
Contributing Membersbtrucking Offline
Contributing Member  (25 Likes)  ****

 		Posts: 145
Joined: Feb 2016
Thanks: 47
Given 25 thank(s) in 8 post(s)
RE: Installing fuel pump cm2250
./uploads/201608/post_1749_1472080975_e7f62d75bfd75d7513778f25bdc87dca.jpeg
Mine was 2 cyl with ceramic plungers
(08-21-2016 )Hammerhead Wrote:  Ok, I could use a little help with this...
I have an 871, so I have glossed over this fuel pump issue instead of paying detailed attention.
I've got a buddy that just recently bought a used truck with a 2250 with about 200k miles, do all 2250's have the three cylinder pump with ceramic plungers?
How would we determine if he has the ceramic plungers?
If not, how do I help him identify a three vs a two?

We are going to put a bypass filter on when we finish this current run.
We are also planning to do an EGR tune-up as well. He is not currently in a position to assume the financial risk of "doing the greatest longevity thing."
What else do I need to help or tell him to watch for?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Installing fuel pump cm2250 - sbtrucking - 08-24-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication