| N14 CEL AND SHUTDOWN |
| 07-15-2022, (Subject: N14 CEL AND SHUTDOWN ) Post: #1 | |||
| |||
| N14 CEL AND SHUTDOWN 2000 international 4700 N14 celect plus runs then cel than stop it stumbles and 90% of the time it catches and runs. I changed the cam position sensor, checked all power ti the ecm and grounds. No change. On insite I was getting high water code it was overfill fixed that. No change. Checked all the 5 volt circuits all have 5 volts. It keeps throwing a 343 code. Any help? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
N14 CEL AND SHUTDOWN - earnies2 - 07-15-2022 RE: N14 CEL AND SHUTDOWN - Rawze - 07-15-2022, RE: N14 CEL AND SHUTDOWN - hhow55 - 07-17-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.