Losing Water and Running Hot

[tree98]

(08-08-2022 )Jpeavy314 Wrote:  Thanks, we’re going to go ahead and replace the head and head gasket in it and see what happens. I’ll post the outcome.

I can tell you what the outcome will be if you aren't going to cut the counterbores and shim the liners up and do it correctly

The outcome will be another blown head gasket in a short amount of time. And the head your about to put on will be junk as well due to fretting.

So all you will have accomplished is wasting a bunch of time and money........Do it right by following the procedures recommended here on this site and make it last a million miles.