no accelarator responce after start |
12-12-2022, (Subject: no accelarator responce after start ) Post: #5 | |||
| |||
RE: no accelarator responce after start (12-12-2022 )RollinCoal Wrote: CM871 with mm demandate Thanks! I just had some doubts because my other truck Volvo 2008 with CM870 doesn't do that. And I also was monitoring it state in Insite, and engine state was always "low speed governor" or something like that and after changing to "automotive governor" I see that there is a parameter for engine control "engine startup oil limit", but it never control my engine after cranking, at least it did not show up during the test. Whatever the case I find identical truck on my parking lot, just not deleted, and it does same thing. Owner like me was surprised, I guess nobody try to press on accelerator right after start. Thanks for helping me out with calibration, I had before old MM calibration in it and now it is day and night. way better. i had to do update earlier. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
no accelarator responce after start - Konstantin - 12-11-2022, RE: no accelarator responce after start - Rawze - 12-12-2022, RE: no accelarator responce after start - Konstantin - 12-12-2022, RE: no accelarator responce after start - RollinCoal - 12-12-2022, RE: no accelarator responce after start - Konstantin - 12-12-2022 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.