| Rod and Main bearings |
| 12-13-2022, (Subject: Rod and Main bearings ) Post: #15 | |||
| |||
RE: Rod and Main bearings (12-13-2022 )kozakvod Wrote: I noticed that every one, all 6, of these rod bearing lobes have this nitch or notch in them. Is this actually correct or a batch production error? So I went through literally everyone of them and they're all the same so I'm going to assume at this point that is an intentional design. Moving on. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - Signature620 - 12-13-2022, RE: Rod and Main bearings - Rawze - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - tree98 - 12-13-2022, RE: Rod and Main bearings - SquareOne - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - Rawze - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - Waterloo - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022, RE: Rod and Main bearings - kozakvod - 12-13-2022 RE: Rod and Main bearings - Rawze - 12-14-2022, RE: Rod and Main bearings - Yauchout - 12-15-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.