Fault Code: 1145 |
09-13-2023, (Subject: Fault Code: 1145 ) Post: #34 | |||
| |||
RE: Fault Code: 1145 I got 1142 fault yesterday. isx 2350 400000 miles. "Injector Solenoid Driver Cylinder 3 - Mechanical System Not Responding or Out of Adjustment" The ECM has detected an error with the injection timing or quantity. - per quickserve Cleared it, and it happened again in less than 24 hrs. It seems that this is the same problem as with 1145 fault that was described in this thread - but for the injector on cylinder number 3. Quickserve recommends checking if the calibration is updated - I have to get to Hagai on that... Other than that it should be a defective injector. I will run a leak test, but it's probably not needed. Could the injector be not leaking but still defective? Please correct me if I am wrong, but the calibration checkup should take care of injection timing and quantity issues? So.... off I go to get a new injector and to watch Rawz's videos..... | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.