Air Dryer Purging Air Every 15 Sec

[GunRunner]

I got the truck back and here are some photos of how everything is hooked up.
-The 1/4” black line is going from the air dryer to the “res” port on the governor
-The 1/4” blue line is going from the “unl” port on the governor to the control port on the air dryer which has a T Block and the 1/4” line from the T Block goes to the air compressor
-The large black braided line goes from the supply port on the air dryer to the head of the compressor
-The larger (maybe 3/8” line) goes from the delivery port of the air dryer to the wet tank I believe

Does this look correct? My next step is to see if the unloaded valve is sticking by spraying some oil into the tube that feeds into the head of the compressor.