Needing Help ISX CM870 CPL8518

[Bakanka]

(09-25-2023 )Rawze Wrote:  A lot to unpack there in your post. It sounds to me like you actually have 3 problems.


Problem #1 ..
Problem #2 ..
problem #3...

Thanks for replying me back.


I forgot to mention that turbo and manifold are oem not aftermarket garbage.

Besides that i have replaced everything on this truck oil coolers oil pump whole bottom end rods and mains water pump.
All sensors with crank sensors too plus bearings in the head where camshafts sits.
Front gears almost everything besides removing head and checking the liners height
The turbo i have on it two years old only egr was blocked.