Lifter Pump C2250

[Punchy]

(10-25-2023 )Rawze Wrote:  while you are at it...

More than 90% of all de-mandate programs and methods that people come up with are very harmful to the engine over time. Assume yours is bad and eating away at the engine until you get it properly checked out.


Copy the program out of the ecm and e-mail it to me for a review of what someone did. Then you can go from there.
ref: http://rawze.com/forums/showthread.php?t...5#pid72945

This is of interest but the thread is not there.

Is there a thread in here detailing how to reprogram/reset the de-mandate on a truck's ECM?