deceleration noise.
09-28-2016, (Subject: deceleration noise. ) 
Post: #12
RE: deceleration noise.
(09-28-2016 )rgreen Wrote:  
(09-28-2016 )Signature620 Wrote:  Do you have much experience with this engine? This is a fairly involved task to walk through over the internet. If you don't have the necessary tools and knowledge, you should take it to someone with does.

EDIT: Just saw the photo...That roller is only just starting to go. What does the cam look like? If the cam is severely damaged it could be the source of your noise, but judging by the roller I'd guess it is not yet bad enough to make much sound.

I think i might need to do a overhead set to see if that might take care of the problem the truck as over 927,000 plus miles. Actually number 1 roller and number 6 roller both have to same scarring starting take place

Over head is always a good idea. Just make sure you can feel the detent on the jake rockers really good.
replyreply


Messages In This Thread
deceleration noise. - rgreen - 09-27-2016,
RE: deceleration noise. - Mr Hagg - 09-28-2016
RE: deceleration noise. - kmk - 09-29-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.