Signature 520 CM570 Low power no codes

[Rawze]

(05-05-2024 )4x4Acco Wrote:  Correct me if im wrong but I believe the engine needs both sensors to start. The crank sensor to indicate the crank angle all the time but the cam sensor to give one indication of which stroke the engine is on. So once the cam gives this position, it is no longer needed as the crank gives this information...?

the engine needs BOTH at all times, ... and for them to both read correctly for it to run smooth and have the right injection timing.

it can guess its way thru a failed sensor issue of one or the other.. but it is bad for the engine and it also will eventually CAUSE ENGINE DAMAGE.