Random shut down

[robert3rekab]

(02-25-2025 )Rawze Wrote:  if you simply turn the keyswitch to the on position in the dash (without cranking), then the gauges should sweep.. then all go to normal. if this is not happening then your problems are likely bigger than just an ecm issue.

it could be the infamous prostar problem of the fuses in the fuse panel are getting tarnished and causing havok with everything ...
info: http://rawze.com/forums/showthread.php?t...1#pid12861

that, or you have power issues somewhere.

The oil pressure gage or any other gage for that matter never before swept and then proceeded to peg out like the oil pressure gage is now doing since after whacking on the ECM I'm going to go ahead and replace all the fuses'cause I know you're a proponent of that be always being a big problem. Also never before with the dash and the beeper stay on even after turning the switch off and then having to cycle it back to on and back to off to get everything quiet..... Thank you rawze for sticking with me on this!