Isx head question
10-10-2016, (Subject: Isx head question ) 
Post: #12
RE: Isx head question
Ok got truck back together. I replaced head,both fuel pumps,damper,front and rear motor mounts,cab bushings,low and high fuel pressure regulators,fan clutch,rear main seal,Bell housing gasket and clutch. Around a year ago had a shop replace clutch and rebuild transmission. They put the wrong clutch in it the springs on the clutch disc was hitting fly wheel bolts. I have been running for about a week or around 2500 miles and seem to be in the 7 mpg range. I am running the 650 tune and will be going back to the 485 tune in a few days when I get settled into the run I going to be on. So fuel mileage should go up from there. The vibration I have been chasing is probably 90% gone.
replyreply


Messages In This Thread
Isx head question - ahm700 - 09-02-2016,
RE: Isx head question - ahm700 - 09-02-2016,
RE: Isx head question - ahm700 - 09-02-2016,
RE: Isx head question - Rawze - 09-02-2016,
RE: Isx head question - ahm700 - 09-03-2016,
RE: Isx head question - ahm700 - 09-08-2016,
RE: Isx head question - ahm700 - 09-08-2016,
RE: Isx head question - ahm700 - 10-10-2016
RE: Isx head question - ahm700 - 10-13-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.