| Cm871 oil pressure issue after cam replacement |
| 01-17-2026, (Subject: Cm871 oil pressure issue after cam replacement ) Post: #2 | |||
| |||
| RE: Cm871 oil pressure issue after cam replacement Were the bearings in each hole verified to be matching to the new ones? Do you know if the oil pump was shimmed properly? There are a lot of factors that were messed with here. It could be anything from wrong bearings installed to worn cam bearings or even a cracked rocker shaft from not being installed or removed properly. User's Signature: You can’t buy love, but you can rent it for 3 minutes! | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm871 oil pressure issue after cam replacement - wdm89 - 01-17-2026, RE: Cm871 oil pressure issue after cam replacement - Bengy88 - 01-17-2026 RE: Cm871 oil pressure issue after cam replacement - wdm89 - 01-17-2026, RE: Cm871 oil pressure issue after cam replacement - Bengy88 - 01-17-2026, RE: Cm871 oil pressure issue after cam replacement - Rawze - 01-18-2026, RE: Cm871 oil pressure issue after cam replacement - wdm89 - 01-18-2026, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.