2013 KW ISL9 CM2250 turbo issues

[JChapman]

(05-05-2026 )Rawze Wrote:  

(05-05-2026 )JChapman Wrote:  

(05-05-2026 )Rawze Wrote:  sounds like the symptoms of the typical bad delete where the turbo is over-spooling to try to warm up a DPF can that is not there any more.

Copy the program from the ecm ans e-mail it to me for a proper review of what someone did in there.
info: https://rawze.com/forums/showthread.php?...5#pid72945

I have Calterm going, but don't have the config file/s it is asking for to open the module. Any help on that side of things?

Thanks

just about any CM220 ecfg file can be used just to copy that 2250-ISL9 file in/out with. It does not have to match exactly.

if nothing else, maybe you can Private Message forum member 'APC' and get some guidance on where to get such things.

APC got me squared away, ill be sending the file to your email right over. Thank you